Easily readable Bourdon tube-type tyre pressure gauge. It is ideal for quick reading in fields as well as tyre maintenance/repair shop. The provisions of the hose help access the rear inner wheel valves.

Calibrated in 10-60 psi in 1 psi units and 60-160 psi in 5 psi units. Used on heavy commercial vehicles.

Calibrated in 10-60 psi in 1 psi units, 60-160 psi in 5 psi units

Attaches to 1/ ” NPT hose fitting.

Snaps on Large bore valve when sleeve in moved
forward, releases when sleeve in pulled back.
Eliminates need to hold chunk by hand.

This is a quick acting fitting used for inflating purpose. It is mainly used in tyre industry to suck air from the inner tubes completely after the core is inserted.

It is ideal for field tyre inflating and tyre maintenance shop. Pressure range 0-160 psi.

High pressure nitrogen charging kit is used for shock struts and accumulators in heavy e a r t h m o v i n g equipment’s for charging nitrogen.

  Kit comes with

• N2 Pressure Regulator with two gauges 0 - 3000 psi and 0 -1500 psi with operating knob.
• Charging Manifold Block with % inch 8.8 Needle Valve 4 Nos. and 0 - 1500 psi pressure gauge.
• '3/16” ID Polyamide tube 5 metre long one end connected with Charging Connector and other with SS high pressure type double check unit coupler.
• ' 3/16" ID Polyamide tube 1.5 metre long both end connected with SS high pressure type double check unit coupler. -
• Double End spanner, Tape, Nitrogen Cylinder Key, Tape (3 metre), Packaging Briefcase.

Earthmoving equipment such as dump trucks, graders, wheel dozers, front end loader and water sprinklers are equipped with various sizes of tubeless tyres. These tubeless tyres are inflated up to 120 psi air pressure. These tyres are mounted on five piece rim assembly on which there is a provision of O ring which helps retain the air pressure inside the tyre. These 0 rings are designed for a minimum 350% of the elongation at break and give.